Vinyl Expressions Vinyl Expressions
 
Application Instructions
 

1) Lay your design down, white grid paper side up. Rub the piece to ensure the letters stick to the milky transfer paper.

 

2) Carefully peel the grid paper off, working from one side to the other. If the lettering is not separating, replace the paper onto that letter, rub down, and try again. (Sometimes it helps to push down on the letter as you are pulling back.)

 

3) Starting at the top of your design, make sure it lies flat on the wall and then slowly work your way down and out. Rub with the application squeegee to push it firmly to the wall.

 

4) Once your design is on the wall, remove the transfer paper by gently pulling straight back. If the words are lifting off the wall, just put it back down, press and try again. You may push the letters down with your fingers. Work slowly with patience! Some fonts are easier than others. Small and delicate letters can take extra caution and patience.

 

5) Please take pictures and e-mail them to us at Info@vinylexpressions.ca
We would love to see what you have created!

 

 
Removal Instructions

To remove Wall Graphics from your surface, simply peel up an edge and slowly peel straight back, not up.

Here are some key things to remember:

- Go slowly, take your time

- If any glue remains on the surface once you have removed your graphic, use any type of price tag remover like GooGone

- If you are removing it from a delicate surface like a wall, you can use a hair dryer to soften it up and make removal easier. Do not use a heat gun as it can melt your graphic!

- If the design has been exposed to the elements for a long time, the graphics may be brittle and break apart. Use a hair dryer to soften the design and assist with removal

Our Vinyl Expressions has successfully been applied and removed from many surfaces. Due to the wide variety of surfaces and their conditions Vinyl Expressions cannot be held responsible for any difficulty experienced when removing the designs or any damage left to the surface.


Vinyl we use:
Oracal 631 (used on indoor walls-semi permanent vinyl)
 

This 3-year film removes cleanly and easily for up to two years after application and has a matte surface that suppresses unwanted reflection. It is only .3 millimeters thick so it gives that hand painted look. Perfect for wall words, quotes and sayings.

 
A6 (used on vehicles, doors, windows, tiles and much more-permanent vinyl)

This is a minimum 6-year intermediate film and is an industry benchmark in intermediate signage. Conforms to flat surfaces and is a permanent solvent adhesive. This vinyl is 3.2 millimeters thick and has a medium gloss.